| Quantity: | |
|---|---|
Product Advantage
Engineered to deliver intense polar affinity and wet-out, instantly anchoring into PVC, vinyl, and plastic backings to permanently stop floor edges from curling up.
Formulated with high internal polymer cohesion to resist structural shifting, sliding, or creeping under constant heavy foot traffic and rolling wheeled loads.
Boasts a high softening point (105 ± 5℃), maintaining elastic structural integrity across varied ambient indoor temperatures without soft bleeding or thermal failure.
Exhibits highly stable viscosity performance under heat, ensuring continuous automated slot coaters lay down a perfectly flat, bubble-free film weight without nozzle tailing.
Fortified with elite anti-oxidant stabilizers to prevent the dried adhesive film from yellowing, drying out, or becoming powdery over decades of subfloor installation.
Thoroughly tested and verified safe by SGS environmental screening, complying with international REACH and RoHS directives for non-toxic indoor building materials.
Technical Parameters
Parameter | Specification |
Primary Industry Segment | Architectural Decor, Resilient Flooring Manufacturing |
Target Application Matrix | Flexible plastic flooring, PVC floor panels, Luxury Vinyl Tiles (LVT) |
Appearance / Color | Solid Block / Yellowish |
Softening Point | 105 ± 5 °C |
Operating Temperature | 160 - 180 °C |
Application Method | Slot Coating (Slot Die Extrusion Systems) |
Shelf Life | 2 years |
Product Uses
Self-Adhesive PVC Planks & Tiles (LVT)
The definitive industrial adhesive choice for backing standard or luxury vinyl tiles (LVT), enabling peel-and-stick convenience with heavy-duty structural permanence.
Flexible Plastic Sheet Flooring Rolls
Optimized for continuous multi-roll manufacturing of commercial-grade flexible PVC or heterogenous vinyl sheet flooring backings requiring high coat weight accuracy.
Decorative Wall-Base Skirtings & Trims
Perfect for pre-coating technical vinyl wall bases, corner protectors, and flexible floor edgings that demand instant grab against vertical concrete or drywall substrates.
FAQ
1. Q: Why is high softening point and shear resistance critical for flooring adhesives?
A: Floors endure extreme static heavy pressure (furniture) and dynamic shear forces (walking). Underfloor heating can also elevate surface temperatures. An adhesive with low thermal limits will bleed or slip. Our flooring formula locks tight at $105^\circ\text{C}$ to ensure complete layout stability.
2. Q: Does this adhesive ensure clean results during high-speed tile cutting and slitting?
A: Yes. Thanks to the intense internal cohesion of our thermoplastic matrix, during factory slitting or die-cutting of the pre-coated vinyl planks, the cut edge remains crisp and free from gum residue, blade gumming, or sticky bleedout.
3. Q: Can this hot melt adhesive successfully wet and anchor into low-surface-energy backings?
A: Yes, absolutely. The formulation includes specialized synthetic tackifiers that lower hot-melt surface tension, allowing the fluid glue to fully wet out and micro-anchor into dense vinyl or recycled PVC plastic backs.
4. Q: What clean-up routine is suggested when transitioning line coatings to this grade?
A: To avoid cross-contamination that alters the exact viscosity curve, flush the melter tanks with clean mineral oil at 120℃. Next, thoroughly rinse the delivery hoses and slot die using this same flooring grade adhesive below 170℃.
5. Q: Does this vinyl flooring adhesive meet green building indoor air safety laws?
A: Yes, 100%. Our product is completely solid, non-solvent based, low-odor, and thoroughly certified by SGS environmental non-toxicity verification, complying with international REACH and RoHS chemical standards for home interiors.