| Quantity: | |
|---|---|
Product Advantage
Engineered with superior heat-resistant dynamics to completely prevent adhesive cold-flow, sliding, or edge-oozing under heavy vertical stress inside hot automotive cabins.
Generates a powerful chemical and mechanical anchor that penetrates deeply into porous non-woven fabrics, heavy carpets, and fiber insulation sheets for an unyielding bond.
Maintains a highly stable, uniform viscosity curve under operating heat, enabling automated spraying modules to distribute fine web or swirl patterns without nozzle clogging.
Formulated using ultra-refined synthetic resins to minimize volatile organic compounds (VOCs), successfully meeting strict global automotive safety benchmarks for interior air quality.
Fortified with top-tier antioxidant stabilizers to prevent the dried adhesive film from turning brittle, degrading, or losing active tackiness over decades of vehicle operation.
Thoroughly tested and certified safe by SGS environmental testing; completely solvent-free, non-toxic, and matching strict international REACH and RoHS export mandates.
Technical Parameters
Parameter | Specification |
Primary Industry Segment | Automotive Component Manufacturing, NVH Insulation, Tier 1 Supply Chains |
Target Application Matrix | Car felts, non-woven interior carpets, roof linings, acoustic foams |
Appearance / Color | Solid Block / Water-white, Translucent |
Softening Point (R&B) | 102 ± 5 °C |
Operating Temperature | 160 - 180 °C |
Application Method | Spray Coating (Automated Swirl/Fiberized Spray Systems) |
Shelf Life | 2 years |
Product Uses
Automotive Roof Lining & Pillars
The definitive industrial adhesive choice for spray-coating non-woven fabrics and decorative felts onto rigid roof linings and ABC pillar boards, resisting overhead gravitational pull.
Trunk Carpets & Insulation Mats
Optimized for laminating heavy-duty floor carpets, side wall linings, and spare tire cover mats that experience high structural friction and heavy load displacement.
NVH Acoustic & Dashboard Insulation
Perfect for permanently bonding porous polyurethane foams, engine firewall fiber mats, and dashboard acoustic linings requiring low-emission and high-heat proximity.
FAQ
1. Q: Why is an elevated softening point (102℃) mandatory for automotive interior adhesives?
A: Closed vehicles parked under direct sunlight can reach interior temperatures above 80℃. Regular hot melts will melt or creep, causing roof linings to sag. Our formula locks tight up to 102℃ to guarantee long-term dimensional stability.
2. Q: Does this adhesive meet the low-odor and fogging requirements of Tier 1 auto manufacturers?
A: Yes. Built from high-purity, highly refined thermoplastic polymers and synthetic resins, it minimizes low-molecular-weight volatiles, ensuring an ultra-low odor profile that aligns with modern automotive interior environmental mandates.
3. Q: How does this formula achieve strong adhesion on highly porous non-woven felts?
A: The formulation features specialized low surface-tension wetting properties at its operating temperature (160 -180℃), allowing the molten adhesive to rapidly penetrate and mechanical-anchor around dense textile fibers before solidifying.
4. Q: What clean-up routine is recommended when changing over automotive spray lines to this grade?
A: To avoid cross-contamination that could lower the specialized thermal resistance, purge the hot tank using clean mineral oil at 120℃, then thoroughly flush delivery hoses and spray nozzles with this exact adhesive grade below 140℃.
5. Q: Does this auto interior adhesive pass international export environmental screenings?
A: Yes, 100%. Our adhesive is completely solid-based, low-emission, non-solvent, and has fully passed rigorous SGS non-toxicity environmental verification, satisfying all international REACH and RoHS directives needed for global automotive supply chains.