| Quantity: | |
|---|---|
Product Advantage
Engineered with a high softening point (103± 5℃) to provide heavy-duty thermal stability, preventing adhesive sliding, edge-oozing, or cohesive failure during hot summer transits.
Exhibits intense polar affinity to instantly bite and micro-anchor onto diverse, challenging substrates including open-cell foams, rough PET films, and textured automotive plastics.
Formulated with premium thermoplastic elastomers that reinforce internal network cohesion, ensuring the tape maintains an unyielding permanent hold under continuous load or stress.
Maintains a stable, controlled viscosity profile (11,000 cps @ 160℃) under precise high-temperature running ranges, allowing automated machines to apply perfectly uniform coating weights.
Fortified with top-tier antioxidant stabilizers to prevent charring or skinning in the melter tank, ensuring the dried adhesive film retains active elastomeric stickiness for years.
Thoroughly screened and certified by SGS testing; completely non-toxic and low-odor, matching strict global directives for international REACH and RoHS chemical safety.
Technical Parameters
Parameter | Specification |
Primary Industry Segment | Industrial Tape Coating, Foam Lamination, Automotive Assembly |
Target Application Matrix | High-performance Foam tapes, Double-sided PET tapes, Technical bonding |
Physical State / Color | Solid / Yellowish |
Softening Point (R&B) | 103 ± 5 °C |
Operating Temperature | 160 - 180 °C |
Lowest Application Temp | 5℃ |
Service Temperature Range | -25℃ to 60℃ |
Tooling Method | Slot Die Coating |
Shelf Life | 2 years |
Product Uses
High-Performance Foam Tape Manufacturing
The definitive industrial choice for slot-die coating onto PE, EVA, or PU foam webs used in structural mounting, soundproofing, and electronic gasketing.
Double-Sided PET Electronic Tapes
Perfect for micro-slot coating onto ultra-thin PET film carriers to produce high-adhesion double-coated tapes for smart devices, appliances, and membrane switches.
Automotive Interior Bonding Strips
Optimized for manufacturing technical attachment tapes used inside automotive cabins to secure trim panels, wire harnesses, and acoustic felts exposed to hot greenhouse sun.
FAQ
1. Q: Why is a 103℃ softening point critical for summer-grade tape adhesives?
A: Shipping containers and warehouses in summer can exceed 55℃. Standard adhesives will soften, bleed from tape edges (edge-oozing), or lose hold entirely. Our item locks its solid polymer structure to survive severe heat.
2. Q: Does this adhesive perform cleanly during automated die-cutting or slitting?
A: Yes, absolutely. Thanks to its high formulation cohesion and internal shear strength, when the finished tape roll is slit or die-cut into specific shapes, the blades cut cleanly without gumming up or leaving messy adhesive residue.
3. Q: What clean-up protocol is recommended when transitioning a line to this glue?
A: To avoid destabilizing the high-heat thermal matrix, purge the system using clean mineral oil at 120℃. Next, flush the tank and lines thoroughly with this exact same model below 170℃ before starting production.
4. Q: Can this adhesive bond securely to low-surface-energy (LSE) plastics?
A: Yes. The formulation is modified with high-affinity tackifiers that reduce surface tension, allowing the hot adhesive to wet rapidly out across difficult substrates like polypropylene (PP) and dense foams to form a deep mechanical anchor.
5. Q: Is this industrial tape adhesive certified for international distribution?
A: Yes, 100%. Our adhesive is completely non-toxic and has fully passed rigorous SGS environmental non-toxicity verification, satisfying all international REACH and RoHS standards required for seamless entry into North American and EU markets.